Hi,<br /><br />Is it true that I will not be able to find UBI on B3 using tarbs box? (There seem to be FTA channels on UBI (lyngsat)<br />I think I found B3, using tarbs box, just by looking at signal level (got it to 60) and signal quality(around 30). (Not sure if it enough). <br />Could not get any UBI channel updates 12640/22500. Then tried GlobalCast 12658/30000, reciever found channels, but could not lock the signal I guess, becouse nothing was displayed. <br /><br />I can watch PanGlobal on PAS8 with no problems.<br /><br />And also, did anyone in melbourne find NSS6?<br /><br />any ideas are appreciated<br /><br />ilya
yes u can get NSS6 in melbourne<br /><br />the satellite u might be on is optus C1 as optus b3 and c1 sit close together move it abit more to the left like a few millimetres and u will find B3 <img border="0" title="" alt="[Wink]" src="images/icons/default/wink.gif" />
thanks<br />Does it mean I will be able to get UBI FTA?
u should be able to but some tarbs boxes dnt show all of them some times if it doesnt not much u can do about it with the tarbs box
Thanks.<br />I got another question in Sat tv section.
</font><blockquote><font size="1" face="Verdana, Arial">quote:</font><hr /><font size="2" face="Verdana, Arial">Originally posted by bumbleb:<br /><strong> Hi,<br /><br />Is it true that I will not be able to find UBI on B3 using tarbs box? (There seem to be FTA channels on UBI (lyngsat)<br />I think I found B3, using tarbs box, just by looking at signal level (got it to 60) and signal quality(around 30). (Not sure if it enough). <br />Could not get any UBI channel updates 12640/22500. Then tried GlobalCast 12658/30000, reciever found channels, but could not lock the signal I guess, becouse nothing was displayed. <br /><br />I can watch PanGlobal on PAS8 with no problems.<br /><br />And also, did anyone in melbourne find NSS6?<br /><br />any ideas are appreciated<br /><br />ilya </strong></font><hr /></blockquote><font size="2" face="Verdana, Arial">The reason your Quality is 30% is that your LNB is not at the right angle. You need to bring it up to 50.<br /><br />The way to do that is tospin the LNB so that the cable is sitting at around 5 O'Clock (looking at the LNB in front of the dish.<br />Regards,<br />Vlad
thanks Vlad, but<br />I did that to get 30% - Rotated LNB to around 5 O'Clock. <br /><br />hmm how do I get 50% then. I got 110cm dish. <br /><br />can two dishes interfere with each other? I got that one on top of the other one on the same pole.<br /><br />thanks<br />ilya