|
0 members (),
777
guests, and
32
robots. |
Key:
Admin,
Global Mod,
Mod
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
There are no members with birthdays on this day. |
#9945
Sat 19 Feb 2005 07:10:PM
|
Joined: Dec 2004
Posts: 367
Mission Specialist Level 2
|
OP
Mission Specialist Level 2
Joined: Dec 2004
Posts: 367 |
I am trying to connect Actuator to my 2,3 mesh dish.My receiver suplys 12 v DC but actuator needs a 32 v how can I fix this problem?
|
|
CMS The Best Conveyancing solicitors conveyancing quotes throughout the UK
For any webhosting enquiries please email webmaster@aus-city.com
|
#9946
Sat 19 Feb 2005 07:11:PM
|
Joined: Feb 2004
Posts: 3,815
Mission Commander
|
Mission Commander
Joined: Feb 2004
Posts: 3,815 |
im pretty sure u need a positioner box<br /><br />its a box that controls the movement of the dish<br /> <br /> <small>[ 19. February 2005, 11:12 AM: Message edited by: -.Lazer.- ]</small>
|
|
#9947
Sun 20 Feb 2005 08:20:AM
|
Joined: Dec 2004
Posts: 367
Mission Specialist Level 2
|
OP
Mission Specialist Level 2
Joined: Dec 2004
Posts: 367 |
I can control moovement of the dish with receiver.Receiver hes that fecility to turn the dish west,east or midle position.Even you put the name of the sat it moves to that sat otomaticely.The problem is positioner needs 32 volt my receiver supy only 12 volt.
|
|
#9948
Sun 20 Feb 2005 08:27:AM
|
Joined: Feb 2004
Posts: 3,815
Mission Commander
|
Mission Commander
Joined: Feb 2004
Posts: 3,815 |
yes those features are for a moteck motor for a small motor for a small ku band dish ie 90cm dish on a moteck i dnt think that feature will work for a actuatator thats y u need a positioner box<br /><br />pretty sure u need a positioner box<br /> <br /> <small>[ 19. February 2005, 12:27 PM: Message edited by: -.Lazer.- ]</small>
|
|
#9949
Sat 19 Feb 2005 09:39:PM
|
Joined: Dec 2004
Posts: 367
Mission Specialist Level 2
|
OP
Mission Specialist Level 2
Joined: Dec 2004
Posts: 367 |
You right Lazer,<br />I did a bit of reading .I definately I need one box for positioner.Thanks...
|
|
#9950
Sat 19 Feb 2005 09:46:PM
|
Joined: Dec 2004
Posts: 367
Mission Specialist Level 2
|
OP
Mission Specialist Level 2
Joined: Dec 2004
Posts: 367 |
Do you know the price of them.?
|
|
#9951
Sun 20 Feb 2005 12:01:AM
|
Joined: Feb 2004
Posts: 3,815
Mission Commander
|
Mission Commander
Joined: Feb 2004
Posts: 3,815 |
yeh cost about $100 or less depends were u get them from <img border="0" title="" alt="[Wink]" src="images/icons/default/wink.gif" />
|
|
#9952
Sun 20 Feb 2005 02:50:AM
|
Joined: Dec 2004
Posts: 367
Mission Specialist Level 2
|
OP
Mission Specialist Level 2
Joined: Dec 2004
Posts: 367 |
Thanks Laser I ordered one its coming Monday afternoon.I hope I wont have any problem to install it.
|
|
#9953
Sun 20 Feb 2005 03:17:AM
|
Joined: Feb 2004
Posts: 3,815
Mission Commander
|
Mission Commander
Joined: Feb 2004
Posts: 3,815 |
if u adjust everything right and pick all the sats up in the clarke belt u shouldt have any problems picking up sats
|
|
#9954
Wed 23 Feb 2005 02:15:AM
|
Joined: Dec 2004
Posts: 367
Mission Specialist Level 2
|
OP
Mission Specialist Level 2
Joined: Dec 2004
Posts: 367 |
I need to sedtup my positioner.Is there any way to do it?<br />To pickup all the sats on the clark belt how should be position as a defolt ?
|
|
#9955
Wed 23 Feb 2005 02:27:AM
|
Joined: Feb 2001
Posts: 4,142
Assistant Launch Director
|
Assistant Launch Director
Joined: Feb 2001
Posts: 4,142 |
I allways find Pas 2 first and then go to pas 8 than<br />palapa c2 at 113 deg east then i go back to pas 8 and try to find intelsat 701 and then i got back to palapa c2 then asiasat3 then asiasat 2 but you arc has to be correct, Not easy for a first timer..I use 2 actuators on my 4.3M dish
|
|
#9956
Wed 23 Feb 2005 09:01:AM
|
Joined: Dec 2004
Posts: 367
Mission Specialist Level 2
|
OP
Mission Specialist Level 2
Joined: Dec 2004
Posts: 367 |
What is the positioner starting degr.?Positioner can be set on bouth side ,wich side is best settings?.
|
|
#9957
Wed 23 Feb 2005 03:03:PM
|
Joined: Feb 2001
Posts: 4,142
Assistant Launch Director
|
Assistant Launch Director
Joined: Feb 2001
Posts: 4,142 |
Start from a satellite in the middle ( If you can, I use Pas 2)then work you way left and back to the middle then right and keep doing that until you have all the Satellites you want.
|
|
#9958
Wed 23 Feb 2005 11:22:PM
|
Joined: Dec 2004
Posts: 367
Mission Specialist Level 2
|
OP
Mission Specialist Level 2
Joined: Dec 2004
Posts: 367 |
Pas 8 4080 V 30000 Frequans is too low.I am getting very good freq other channels but 4080 V [VIDEOLAND MODIE)is too low can anyone help me pls Thankyou.
|
|
#9959
Wed 23 Feb 2005 11:28:PM
|
Joined: Feb 2004
Posts: 3,815
Mission Commander
|
Mission Commander
Joined: Feb 2004
Posts: 3,815 |
The Horizontal Signals on PAS8 are alot more strounger then the Vertical Signals so it means u need a bigger dish for vertical signals off PAS8 u might get some Vertical signals but they will be weak the Horizontals are Strounger
|
|
#9960
Wed 23 Feb 2005 11:37:PM
|
Joined: Dec 2004
Posts: 367
Mission Specialist Level 2
|
OP
Mission Specialist Level 2
Joined: Dec 2004
Posts: 367 |
My dish was fix and I used to get this freq perfect.Now I `v got positioner and I can`t get as good as before .Even Last night I watched the movie cristal clear..
|
|
#9961
Wed 23 Feb 2005 11:45:PM
|
Joined: Feb 2004
Posts: 3,815
Mission Commander
|
Mission Commander
Joined: Feb 2004
Posts: 3,815 |
ok just try to adjust it better maybe lnb move around or sumthin??
|
|
#9962
Thu 24 Feb 2005 01:28:AM
|
Joined: Dec 2004
Posts: 367
Mission Specialist Level 2
|
OP
Mission Specialist Level 2
Joined: Dec 2004
Posts: 367 |
LNB ,LNB, LNB...<br />I just twist the LNB 180degr. I v got V freqs.But lost H freq s. It is ok wont hurt.Videoland Movie %70 cristal clear... <img border="0" title="" alt="[Big Grin]" src="images/icons/default/grin.gif" /> <img border="0" title="" alt="[Big Grin]" src="images/icons/default/grin.gif" /> <img border="0" title="" alt="[Big Grin]" src="images/icons/default/grin.gif" />
|
|
#9963
Thu 24 Feb 2005 01:29:AM
|
Joined: Dec 2004
Posts: 367
Mission Specialist Level 2
|
OP
Mission Specialist Level 2
Joined: Dec 2004
Posts: 367 |
by the way did you see my new photo on my web page .I told you I ll upgrade it as soon as positioner goes on ... <img border="0" title="" alt="[Wink]" src="images/icons/default/wink.gif" />
|
|
#9964
Thu 24 Feb 2005 01:46:AM
|
Joined: Feb 2004
Posts: 3,815
Mission Commander
|
Mission Commander
Joined: Feb 2004
Posts: 3,815 |
good stuff mr mixer looking good <img border="0" title="" alt="[Wink]" src="images/icons/default/wink.gif" />
|
|
Forums60
Topics686,734
Posts721,345
Members2,957
|
Most Online3,142 Jan 16th, 2023
|
|
|
|
Copyright 1996 - 2023 by David Cottle. Designed by David Bate Jr. All Rights Reserved.
By using this forum, the user agrees not to transfer any data or technical information received under the agreement, to any other entity without the express approval of the AUS-CITY Forum Admins and/or authors of individual posts (Forum Admins and DoD/USSPACECOM for the analysis of satellite tracking data).
Two-line elements (TLE) and all other satellite data presented and distributed via this forum and e-mail lists of AUS-CITY are distributed with permission from DoD/USSTRATCOM.
Reprise Hosting
|
|